< >

PN10 DN600 Blind Flange

To put it simply, the blind plate is a strong flange used to shut the stop of the pipe.
Generally used in the feed water department pipe end. There is a brief section of the pipe area to first stress take a look at used for brief closure.
Flanges are disk-shaped parts, most oftentimes used in pipeline engineering. Flanges are used in pairs.
In pipeline engineering, flange is basically used for pipeline connection. In the want to join the pipe, quite a number set up of a flange, low stress pipe can use wire flange, the use of greater than four kg of stress welded flange. Put a seal between the two flanges and fasten them with bolts. Flanges of one of a kind pressures have specific thicknesses and use specific bolts.
Water pumps and valves, when linked with pipes, the neighborhood components of these gear are additionally made into the corresponding flange shape, additionally regarded as flange connection.
All in the two planes in the periphery of the use of bolt connection at the equal time closed connection parts, commonly known as "flange", such as the connection of air flow pipe, this sort of components can be known as "flange category parts".
But this connection is solely a phase of the equipment, such as the connection of the flange and the water pump, it is now not correct to name the water pump "flange parts". Relatively small, such as valves, can be known as "flange parts". Flange connection is an vital connection mode in pipeline construction. Flange connection is the two pipes, pipe fittings or equipment, respectively constant on a flange plate, between the two flanges, plus flange pad, bolted collectively to whole the connection. Some pipe fittings and tools have their very own flange, additionally belong to the flange connection.

Contact Now

Product Details

A PN10 blind flange with DN600 size would typically have the following specifications:

PN10 refers to the pressure rating of the flange, which in this case is 10 bar.
DN600 refers to the nominal diameter of the flange, which is 600mm.
blind flange means that it is a solid disk that is used to block off a pipeline or to create a stoppage at the end of a pipeline.
The flange would be made of a suitable material such as carbon steel or stainless steel, depending on the application and the fluid being transported. It would also have bolt holes around the circumference to allow for easy installation and removal.

Overall, a PN10 DN600 Blind flange is a common type of flange used in industrial piping systems for various applications.

Our Company

Jin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing. Existing fixed assets of 40 million,the annual output 40 million tons.Products are exported to Japan, the United States, Germany, South Korea, Russia, Brazil, South Africa, more than 20 countries and regions, such as product quality deeply the general customers the high praise and trust.

Company strong technical force, professional experience, equiptment, professional production and technical personnel 10 people, the production of 120 front-line workers, management personnel E people, packing, inspection personnel more than 20 people. High quality international most advanced forging machinery processing, assembly, inspection, packaging production lines, product quality meet the national and international standards, and has obtained ISSO9001-2000 quality management system certification, the French classification society certification, China special equipment manufacturing license, pressure vessel manufacturing license.

Our Factory

Raw Material Blanking

Welding Ends For Welding Neck Flanges